Description
Light filler for walls and ceilings Taktika LS
- Ready to use in a variety of applications
- Easy to apply and smooth up to 3 mm thick layer
- Quick drying and non-cracking
- Easy to sand
- Water-based
- Environment and health friendly
Use
For leveling concrete, plasterboard, plaster and other mineral surfaces before water-based paint and wallpaper.
Recommended for both initial (on rough surfaces) and final smoothing.
Coverage rate
1 m²/l for 1 mm thick layer. The exact coverage rate is determined by covering the test area. Coating thickness: 3 mm
Technical data
Purpose: for interior use, dry areas
Binder: acrylic copolymer
Filler: dolomite, perlite
Solvent: water
Color: white, yellow white
Density: ~1,40 g/cm³ EN ISO 2811-1
Particle size: <0,200 mm
pH: 8,0-9,0
Quality standards and certificates: CE marking EN 15824, EN 13963
Volatile organic compounds (VOC): <1 g/l EN ISO 11890-2
Non–volatile–matter content by volume: 45±1 % EN ISO 3251
Reaction to fire: A2-s1,d0 EN 13501-1
Adhesion: >0,3 MPa EN 13963
Non-existence cracks: no cracks EN 13963
Work tools: spatula, roller, airless spraying gun
Tool cleaning: with water
Application conditions: +10 ⁰C to +25 ⁰C and 35–80 % relative humidity
Coating thickness: 3 mm
Coverage rate: 1 m²/l for 1 mm thick layer. The exact coverage rate is determined by covering the test area.
Drying time (23 °C, 50 % RH): 1 mm dries in 2-4 hours and gains full strength in 28 days. Drying time depends on surface, layer thickness, air temperature and humidity, etc.
Surface preparation
The surface must be dry, capable of withstanding loads, stable and clean. Prime highly or un evenly absorbent surfaces with deep primer IGIS AG.
Filling
Stir well before use. Apply the second layer only when the first layer is completely dry. Before painting sand the filled surface and remove the dust.
Precautionary statements: keep out of reach of children, avoid release to the environment, wear protective gloves/ protective clothing/eye protective/face protective. IF ON SKIN: wash with plenty of soap and water. IF IN EYES: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Additional hazard information: EUH208 – contains a mixture of 5-chlor-2-metil-2H-izotiazol-3-one and 2-metil-2H-izotiazol -3-one (3:1), 1,2-benzisothiazol-3(2H) -one, can cause allergy in humans.
Shelf life in tightly closed original packaging: 12 months from the date of manufacture
Storage and transportation conditions: store the product tightly closed in dry well-ventilated place at a temperature of +5 ⁰C to +30 ⁰C, protect against from damage, frost and direct sunlight.
Waste management
Do not pour into drains, water or soil. Empty, dry product package should be recycled or disposed of in accordance with national law.
Packing: 10 l buckets, 15 l bags
