Ready for use filler. For the levelling of concrete, gypsum boards, plaster and other mineral surfaces before painting them with water-based dispersion paints and wallpaper. Recommended for levelling the roughness of the first levelling layer.
Ready to use coarse-grained polymeric filler for interior use. For the first leveling layer of roughly plastered and other mineral surfaces.
1 m²/1,6 kg for 1 mm thick layer. Maximum thickness of one layer – 4 mm.
Purpose: for interior use, dry areas
Binder: acrylic copolymer
Filler: dolomite
Solvent: water
Color: white, yellow white
Density: 1,69-1,74 g/cm³
Particle size: <0,200 mm
pH: 8,0-9,0
Quality standards and certificates: CE marking EN 15824, EN 13963
Volatile organic compounds (VOC): <1 g/l EN ISO 11890-2
Formaldehyde concentration in filler: VdL-RL 03: 5 ppm or (5,3×10-4) %
Non–volatile–matter content: 70,0-71,0 % EN ISO 3251
Reaction to fire: A2-s1,d0 EN 13501-1
Adhesion: MPa ≥0,3 EN 1542
Non-existence cracks: no cracks EN 13963
Work tools: spatula, roller, airless spraying gun
Tool cleaning: with water
Application conditions: +10 ⁰C to +25 ⁰C and 35–80 % relative humidity
Coating thickness: 4 mm
Coverage rate: 1 m²/1,6 kg for 1 mm thick layer
Drying time (23 °C, 50 % RH): 1 mm dries in 2-4 hours and gains full strength in 28 days. Drying time depends on surface, layer thickness, air temperature and humidity, etc.
Surface preparation
The surface must be dry, capable of withstanding loads, stable and clean. Prime highly or un evenly absorbent surfaces with deep primer IGIS AG.
Filling
Stir well before use. Up to 5% water can be added for spraying. Apply the second layer only when the first layer is completely dry. Before painting sand the filled surface and remove the dust.
Precautionary statements: keep out of reach of children, avoid release to the environment, wear protective gloves/ protective clothing/eye protective/face protective. IF ON SKIN: wash with plenty of soap and water. IF IN EYES: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Additional hazard information: EUH208 – contains a mixture of 5-chlor-2-metil-2H-izotiazol-3-one and 2-metil-2H-izotiazol -3-one (3:1), 1,2-benzisothiazol-3(2H) -one, can cause allergy in humans.
Shelf life in tightly closed original packaging: 1 year from the date of manufacture
Storage and transportation conditions: store the product tightly closed in dry well-ventilated place at a temperature of +5 ⁰C to +30 ⁰C, protect against from damage, frost and direct sunlight.
Waste management
Do not pour into drains, water or soil. Empty, dry product package should be recycled or disposed of in accordance with national law.
Packing: 18 kg buckets, 25 kg bags
